Mold Solutions in Industrial District
Don’t let a mold problem in your Industrial District home go unnoticed when you can easily get mold removed or prevent it from growing in the first place. Mold can strike anywhere, even in Industrial District. It is possible for mold to hide in buildings for years at a time or take root during the early construction phase.
Call 425-888-3332 to Schedule an Appointment
Table of Contents
- Mold Solutions in Industrial District
- Existing Mold in Industrial District
- Mold Abatement in Industrial District
- Finding the Mold in Industrial District
- A Comprehensive Approach to Mold for Industrial District Residents
Mold Solutions NW understands the particular challenges of preventing mold in Industrial District. Stopping mold from starting or spreading is our focus and passion. We live and work in the northwest, too, and ensure the products we use don’t pose any threat to the health of the environment here.
Among the products we use to address mold issues is the resurfacing agent Microbe Guard, which creates a new, permanent layer over a surface. The new surface will resist microbial attack forever and make sure your home stays mold free. This is one piece of our comprehensive services. Mold is more than a surface problem – we look deeper and use methods focused on long-term prevention. If your home is brand new, ensure mold never has a chance to grow by protecting the structure during construction.
Our experts in Industrial District have an extraordinary safety record and use affordable and environmentally friendly products. They will permanently end your mold problems with services that come with an exceptional warranty for your peace of mind. There’s no need to worry about mold in Industrial District if you have mold solutions from our experienced team hard at work for you.
Remediation, inspection for problems and prevention form the core of our strategy. All three of these aspects work in tandem to protect against mold and root it out wherever it may be hiding. After we address any existing issues, we’ll give you the peace of mind of preventative measures as well. We will find every nook and cranny where mold might try to spread. If your building or home is under construction, we can apply preventative treatments to make sure you never have a problem in the future. Prevention can act in tandem with inspect or remediation, or both. Preventative measures may come up in the middle of a remediation depending on your circumstances.
Mold Remediation in Industrial District 98134
It isn’t just home owners who need to eliminate mold. Mold can make people sick and damage the walls, floors and foundations of just about any structure, including a hospital, school or office. It can be easy to miss it when mold strikes, though. It can hide in unlikely and rarely used locations, going undetected for months or years. When it goes undetected, mold gets a chance to spread throughout a building, potentially causing illnesses and damage.
Whether its been there for days or years, a remediation can get rid of mold problems. Our process can detect even the sneakiest mold before it becomes a threat. Nothing less than total mold remediation is our aim. The three tiers of our approach help us reach that goal.
Step 1: Finding the Mold in 98134
Our first step is to search the building high and low and find ever bit of mold that needs to be addressed. An inspector will look for things like existing mold, cracks in the foundation, leaks and excess moisture. Inspection is a major piece of our overall strategy and you can read more about it below.
Step 2: Stopping the Spread
One of our first jobs when we find mold in a building is to cordon off that area to stop it from spreading. We use tools like plastic sheeting and air scrubbers to discover further mold growth. It is important before trying to remove the mold that we ensure that it cannot accidentally spread during the process. Spores that are undetectable to the human eye have to be carefully contained so the mold cannot take root elsewhere in the building and start regrowing.
Step 3: Mold Removers
Next, it is time to get rid of the mold. Once we begin to treat the mold, Mold Solutions NW will use various products to eliminate the mold. MMR, a commercial grade mold killer, seeps into surfaces where it is applied to destroy any mold present. But mold may leave behind ugly stains after it is destroyed. During mold removal, you might notice stains on surfaces like wood that were caused by the mold itself. At Mold Solutions NW we understand that getting rid of such stains is also important to our customers; MMR can get underneath surfaces to help with this aspect as well.
Step 4: Tidying Up
In the mold remediation process, certain items will have to be discarded if they cannot be cleaned. We will remove materials like carpeting, cabinetry, drywall and insulation during the process. That’s all part of the cleanup process, which also includes vacuuming and sweeping up any dirt or minor particles overlooked in the remediation process. Particles that might escape containment and move to a new location are collected in a HEPA vacuum. This is a second stage of containment. This process keeps mold and spores from getting out into the air and traveling to a different surface to grow again.
Step 5: Keeping Mold Gone
It’s not enough just to remove mold – we want to protect you from having it come back in the future. We treat affected areas with an EPA-registered, safe product that destroys microbes trying to grow in your home. We have intentionally chosen a product that has no VOC emissions, is water-based and is non-toxic so that you don’t need to fear environmental contamination or health issues from chemicals. We go into more detail about our prevention strategies below. We will make sure mold has no chance to return after we eliminate it from your home, office or other building.
Step 6: Last Appraisal
Finally, we make a thorough inspection of our work to ensure we didn’t miss a single spore. We check to make sure we removed all mold and contaminated items, and that we cleaned up the area where we worked. Then we back up our work with a 10-year warranty (as included in the bid). The initial and final inspections of a building suffering from a mold problem are important for first identifying all issues in the structure and then making sure the remediation and prevention were completely thorough. Our inspectors make their assessments with the backing of years of expertise in mold remediation. They won’t leave the site of a problem until they’re satisfied that the mold is gone and not coming back.
Stopping Growth in Industrial District 98134
Our mold solutions will do more than simply get rid of existing mold. It isn’t sufficient to just kill and clean up mold where we find it. We also want to make sure to prevent it ever coming back. Preventative measures are therefore an important part of our approach. We understand how important prevention is for Industrial District and the Pacific Northwest in particular. Any home, office or other structure built here has to be aware of the effects of the damp climate we live in. It’s no surprise then that prevention is a big worry in this region.
People often desire mold prevention services while a new building is under construction. As a home is being built, it may be exposed to rain and other natural elements that could promote mold growth. Rain, air moisture and wet ground are all threats the Pacific Northwest is well-known for. But during the building of a new structure is also a great time to explore mold prevention plans that can offer peace of mind even after the building is done with. If mold sneaks in early on, it can lurk in places that are hard to discover after the building is completed. If this goes on too long people might get sick from mold they don’t even know is present. Mold can make not only you and your family sick, but also your pets. Plus, surfaces like walls, ceilings and floors – and even the foundation – may be made weaker by a mold infestation.
Therefore, the value of prevention cannot be overstated when it comes to mold. And prevention should not be limited just to homes; hospitals, schools and offices should also try to prevent growth. Any new structure can get infested with mold before it’s even complete.
At Mold Solutions NW, we conduct mold prevention using Microbe Guard. This permanent treatment works by creating a new surface over a product such as wood or other surfaces. The added layer will also fight off microbes. A surface covered in Microbe Guard repels spores in the air that try to dig in and grow in a different location.
Mold prevention is a key component of our overall strategy of mold solutions in Industrial District. As one piece of our overall approach, it may occur before, after or even during the remediation. It depends on your specific situation and whether mold already exists in the structure.
Prevention also applies to structures that have already had issues with mold growth. While it is common to focus on mold prevention during the construction of a building, it’s never too late to think about prevention. Even an old home that has had mold issues in the past can benefit from prevention efforts after remediation. While it may be more urgent to eliminate the mold that already exists, after that is taken care of, focusing on future prevention will offer peace of mind that mold won’t take hold again. That’s why we make it a constant part of our planning. Whatever your circumstances may be right now, we also want to leave you feeling sure that you won’t deal with mold growth again.
We pride ourselves on offering full service mold inspection, remediation, removal and prevention as part of a comprehensive plan to eliminate mold. We keep your specific needs in mind while working to combine expertise and precision in our mold solution services.
Discovering the Mold Problem in Industrial District
Mold is a sneaky threat. We therefore conduct in-depth inspections during any remediation of a building with issues.
Mold can’t escape the careful eyes of our inspectors, who know how to search any home, office or other building for telltale signs. We want to root it out wherever it lives so it cannot harm people or property. Therefore, our mold inspection process is extremely thorough. Everyone at Mold Solutions NW understands that our beautiful Pacific Northwest can unfortunately promote mold growth.
Many people are anxious to remove mold after they spot it because it is a health hazard. While that is a very serious concern, people may not realize that there are several other valid reasons to want to remove and prevent mold. Mold also has the ability to sicken pets and weaken the core structures of a building that keep it sturdy. Home owners might not even know that their house is at risk when they spot mold, but it is actually dangerous for the integrity of the structure. Structural pieces like the walls and foundation of a building will get slowly but surely ruined by mold.
Obviously, this is a dangerous situation that calls for swift remediation. The climate in Industrial District and the surrounding region can promote mold growth that is harmful to building integrity. Our experienced inspectors understand these complications, though, and how to find any trace of mold you may have. This is why we see inspection as so important to the work of eliminating mold before it can make for a dangerous situation.
Our Mold Remediation Strategy for Industrial District Residents
Mold problems demand solutions. A successful strategy for dealing with mold should do more than get rid of growth – it should prevent it. Mold Solutions NW understands the particular mold issues facing Industrial District and how to address them. That’s why we work on remediation, inspection and prevention together to stop mold now and in the future.
We think our approach to mold removal in Industrial District can provide top notch solutions to your mold issues. The products we employ during our process are environmentally sound and EPA-registered, yet affordable for most budgets. We pride ourselves on our years of expertise and outstanding safety record.