Mold Solutions in Medina
Mold removal and remediation services in Medina not only get rid of mold growing in your home, but also ensure it cannot come back and take hold again. Nearly any location can face mold issues. It is possible for mold to hide in buildings for years at a time or take root during the early construction phase.
Call 425-888-3332 to Schedule an Appointment
Table of Contents
- Mold Solutions in Medina
- Existing Mold in Medina
- Mold Abatement in Medina
- Mold Inspection in Medina
- Mold Solution Services for Medina Residents
At Mold Solutions NW, we pride ourselves on appreciating the specific needs of Medina and the Pacific Northwest. Stopping mold from starting or spreading is our focus and passion. We live and work in the northwest, too, and ensure the products we use don’t pose any threat to the health of the environment here.
One technique we employ with this goal in mind is Microbe Guard, which resurfaces areas where mold is trying to grow. By resisting microbial assaults, the new surface can seal out mold, giving it no chance to grow. This is one piece of our comprehensive services. We aren’t just looking to get rid of mold you can see now – we want to make sure it never comes back. People building a new home or structure will find our prevention strategies especially important.
Our experts in Medina have an extraordinary safety record and use affordable and environmentally friendly products. They can rid any building of mold and back it up with a warranty as part of some bids for remediation. There’s no need to worry about mold in Medina if you have mold solutions from our experienced team hard at work for you.
Remediation, inspection for problems and prevention form the core of our strategy. We believe this approach offers the surest method of mitigating mold problems. After we address any existing issues, we’ll give you the peace of mind of preventative measures as well. Inspection can detect the hidden corners where mold likes to grow. If your building or home is under construction, we can apply preventative treatments to make sure you never have a problem in the future. Prevention can act in tandem with inspect or remediation, or both. Preventative measures may come up in the middle of a remediation depending on your circumstances.
Mold Remediation in Medina 98039
It isn’t just home owners who need to eliminate mold. Any structure can accrue mold buildup, including office buildings, schools and hospitals, and the people who use those buildings are in danger of getting sick from dangerous mold. Sneaky mold infestations can easily go unnoticed. Finding mold isn’t always obvious and it sometimes is left to grow for years. Left unchecked like this, the mold has an opportunity to not just grow, but also spread to other locations in the building.
Whether its been there for days or years, a remediation can get rid of mold problems. We’ll find mold wherever it’s growing and destroy it at its source. Our goal is 100% mold removal and prevention. Our process for achieving this is thorough.
Step 1: Detection in 98039
Mold remediation begins with an inspection to check every nook and cranny where mold might be hiding. Some of the telltale signs include cracks, leaks and excess moisture that can promote mold growth. You can read more about how inspection figures into our broader plan for mold solutions below.
Step 2: Stopping the Spread
If mold is discovered somewhere, we will need to use techniques to prevent it from branching out to other areas. Air scrubbers and plastic sheeting help keep the area where mold is discovered sealed off and safe. It is important before trying to remove the mold that we ensure that it cannot accidentally spread during the process. Spores that are undetectable to the human eye have to be carefully contained so the mold cannot take root elsewhere in the building and start regrowing.
Step 3: Mold Removers
Next, it is time to get rid of the mold. There are products that help Mold Solutions NW during the crucial step of killing off the mold. We treat contaminated materials with MMR, a commercial grade mold remover that can instantly penetrate surfaces to clean and eliminate mold. We also try to remove any stains that mold may have caused. Mold can stain things like wood as it grows, leaving behind permanent cosmetic damage even after it is gone. MMR helps Mold Solutions NW address stain concerns as well as mold growth by getting under the surface on affected areas.
Step 4: Tidying Up
In the course of a remediation, we occasionally recommend discarding certain types of surfaces and objects. We will remove materials like carpeting, cabinetry, drywall and insulation during the process. Tidying up and discarding surfaces that cannot be adequately cleaned during a remediation factor in to our process. Particles that might escape containment and move to a new location are collected in a HEPA vacuum. This is a second stage of containment. Again, we aim to trap and eliminate any mold so that it cannot sneak into a different part of the building and start growing all over again.
Step 5: Keeping Mold Gone
It’s not enough just to remove mold – we want to protect you from having it come back in the future. That’s why we employ an EPA-registered anti-microbial that is so good at preventing mold that we even back it with a 10-year warranty. You will have no reason to worry about chemical irritants, either, as the anti-microbial we use is non-toxic, water-based and has no VOC emissions. Prevention, like inspection, is a core part of our approach that is discussed in more detail below. At Mold Solutions NW, we don’t just want to get rid of mold – we don’t want it to ever grow back.
Step 6: A Last Look
Finally, we make a thorough inspection of our work to ensure we didn’t miss a single spore. In addition to cleaning the work area, we get rid of any mold-infested or contaminated surfaces. Then we back up our work with a 10-year warranty (as included in the bid). While the initial inspection is for finding the root of the problem, the final inspection helps us locate anything that could be an issue in the future and validate the integrity of our remediation work. Our inspectors make their assessments with the backing of years of expertise in mold remediation. They won’t leave the site of a problem until they’re satisfied that the mold is gone and not coming back.
Mold Prevention in Medina 98039
As mentioned above, it isn’t enough just to remove mold. Stopping growth now must be coupled with stopping growth in the future. Some of our mold solution services focus specifically on prevention. Mold isn’t a novel issue in Medina or the Pacific Northwest; a lot of people are concerned about preventing mold growth even before they see any. The weather here is frequently wet and that can lead to significant mold problems in any building. It’s no surprise then that prevention is a big worry in this region.
Prevention is a frequent concern during construction of a new home. The climate is an obvious factor during construction while the structure cannot be perfectly protected from the weather. The Pacific Northwest is particularly hazardous because the air and ground are so frequently wet. For these reasons, prevention comes often comes into play during the building phase, while there’s ample opportunity to come up with strategies and measures. If mold sneaks in early on, it can lurk in places that are hard to discover after the building is completed. This can lead to structure damage and result in people getting sick. Mold can make not only you and your family sick, but also your pets. And it causes damage to the integrity of a structure, eating away at walls, floors and even the foundations of the building.
If you want to protect your family and home, stop mold before it can start. Mold prevention is also appropriate for the construction of non-residential buildings like offices and hospitals. Any new structure can get infested with mold before it’s even complete.
At Mold Solutions NW, we conduct mold prevention using Microbe Guard. This permanent treatment works by creating a new surface over a product such as wood or other surfaces. The new surface is resistant to microbial attack. A surface covered in Microbe Guard repels spores in the air that try to dig in and grow in a different location.
We pride ourselves on our prevention techniques and methods in Medina. Mold prevention can happen after mold remediation, but is also work before or during the process. When to apply preventative techniques comes down to the particular needs in your home or building.
Even a building that already has a mold problem will benefit from prevention. Any structure, from brand new construction to a decades old home, will get value out of prevention methods that keep mold from growing. Mold prevention can even apply to a home that has not had any issues for years. Sometimes prevention gets overlooked during the rush to get rid of a problem that already exists, but we believe preventative measures can offer lasting security. Part of our normal remediation process is, in fact, prevention. We want to make sure no home, office or other building has a mold problem even if it has already required a remediation to root out an existing issue.
Preventing mold is just as important to us as finding where it is and eliminating it in the first place. We keep your specific needs in mind while working to combine expertise and precision in our mold solution services.
Mold Inspection in Medina
It’s not always easy to find mold. Therefore, our inspectors look high and low at all the places where mold might try to grow.
Our inspectors will go into your home, office or any other building and try to detect all the sneaky places mold may lurk. We aim to stop a mold growth before people or the structure itself is harmed in any way. The inspections we conduct are therefore very detailed. Everyone at Mold Solutions NW understands that our beautiful Pacific Northwest can unfortunately promote mold growth.
One of the biggest causes for concern with mold is health issues. But health issues are just the tip of the iceberg when it comes to motivations for eliminating mold. It can not only be damaging to humans, but also beloved pets and the structures where it is growing. The foundation of the building could be dangerously compromised by mold that damages it as it grows undetected. Mold can eat away at many surfaces, including walls, ceilings, floors or the very foundations of the structure.
Remediation is crucial in situations where mold exists. With so much moisture in the air and ground in Medina, mold can find a way into buildings and start to compromise their stability. The inspectors who will work with you will be able to find any sign of trouble in your home, however. That is why inspection is a key aspect of mold solution services, helping to find mold and damage before the situation can deteriorate.
Mold Solution Services for Medina Residents
Mold problems demand solutions. Comprehensive services to address issues that arise from mold should not only root out and destroy mold, but prevent future issues. Mold Solutions NW knows Medina and the challenges you’ll face here regarding mold growth, as well as the best solutions. That’s why we work on remediation, inspection and prevention together to stop mold now and in the future.
We think our approach to mold removal in Medina can provide top notch solutions to your mold issues. We are selective in our approaches, using EPA-registered products that won’t harm the environment but are still affordable. Our stellar safety record and long experience speak for themselves.