Preventing Mold Problems in Washington Park
Mold removal and remediation services in Washington Park not only get rid of mold growing in your home, but also ensure it cannot come back and take hold again. Mold isn’t only a problem in Washington Park. Whether your home is still being built or you’ve lived there for years, mold growth can strike at any time.
Call 425-888-3332 to Schedule an Appointment
Table of Contents
- Getting Rid of Mold in Washington Park
- Eliminating Mold in Washington Park
- Mold Prevention in Washington Park
- Mold Inspection in Washington Park
- Our Mold Remediation Strategy for Washington Park Residents
At Mold Solutions NW, we pride ourselves on appreciating the specific needs of Washington Park and the Pacific Northwest. We are eager to work with you to prevent or remove mold. We also want to protect the beautiful region where we live, though, and do so through the use of EPA-registered remediation products.
Among the products we use to address mold issues is the resurfacing agent Microbe Guard, which creates a new, permanent layer over a surface. The new surface will resist microbial attack forever and make sure your home stays mold free. This is one piece of our comprehensive services. Mold is more than a surface problem – we look deeper and use methods focused on long-term prevention. People building a new home or structure will find our prevention strategies especially important.
Our experts in Washington Park have an extraordinary safety record and use affordable and environmentally friendly products. They will permanently end your mold problems with services that come with an exceptional warranty for your peace of mind. There’s no need to worry about mold in Washington Park if you have mold solutions from our experienced team hard at work for you.
Remediation, inspection for problems and prevention form the core of our strategy. We believe this approach offers the surest method of mitigating mold problems. After we address any existing issues, we’ll give you the peace of mind of preventative measures as well. We will carefully inspect all the areas where mold can grow. By rooting out these locations, it is possible to take preventative measures against future growth. But prevention can also be part of a remediation process. Preventative measures may come up in the middle of a remediation depending on your circumstances.
Mold Remediation in Washington Park 98112
It isn’t just home owners who need to eliminate mold. Mold can make people sick and damage the walls, floors and foundations of just about any structure, including a hospital, school or office. Sneaky mold infestations can easily go unnoticed. It can hide in unlikely and rarely used locations, going undetected for months or years. When it goes undetected, mold gets a chance to spread throughout a building, potentially causing illnesses and damage.
A mold remediation will clean up the issue no matter how extensive it proves. Our process can detect even the sneakiest mold before it becomes a threat. Our goal is 100% mold removal and prevention. Our comprehensive approach ensures we achieve this.
Step 1: Finding the Mold in 98112
Mold remediation begins with an inspection to check every nook and cranny where mold might be hiding. Some of the telltale signs include cracks, leaks and excess moisture that can promote mold growth. Inspection is a major piece of our overall strategy and you can read more about it below.
Step 2: Preventing Growth
One of our first jobs when we find mold in a building is to cordon off that area to stop it from spreading. Air scrubbers and plastic sheeting help keep the area where mold is discovered sealed off and safe. Our experts will make sure that the remediation process doesn’t allow the mold to spread. Even the tiny particles we can’t necessarily see are accounted for so they can’t escape into the air and find a new place to take root.
Step 3: Mold Removers
Next, it is time to get rid of the mold. Once we begin to treat the mold, Mold Solutions NW will use various products to eliminate the mold. One product we use is MMR, a commercial grade tool that gets deep beneath the outer layer to destroy mold. But mold may leave behind ugly stains after it is destroyed. Mold can stain things like wood as it grows, leaving behind permanent cosmetic damage even after it is gone. MMR helps Mold Solutions NW address stain concerns as well as mold growth by getting under the surface on affected areas.
Step 4: Cleaning
It is sometimes necessary to dispose of certain items too badly damaged by mold growth. Things such as insulation, cabinetry and drywall are frequently too damaged to remain. Tidying up and discarding surfaces that cannot be adequately cleaned during a remediation factor in to our process. A special HEPA vacuum ensures that even tiny particles get collected to minimize the chances of the mold moving elsewhere. This aids in our efforts at containment of the mold. This process keeps mold and spores from getting out into the air and traveling to a different surface to grow again.
Step 5: Keeping Mold Gone
It’s not enough just to remove mold – we want to protect you from having it come back in the future. We treat affected areas with an EPA-registered, safe product that destroys microbes trying to grow in your home. You will have no reason to worry about chemical irritants, either, as the anti-microbial we use is non-toxic, water-based and has no VOC emissions. We go into more detail about our prevention strategies below. At Mold Solutions NW, we don’t just want to get rid of mold – we don’t want it to ever grow back.
Step 6: A Last Look
A final inspection helps find any possible place where mold may still lurk. Surfaces with contamination and mold are removed and destroyed and the work area is cleaned up. Then we back up our work with a 10-year warranty (as included in the bid). We feel our work is not complete until we conduct this final inspection, where we will validate our initial findings from our first inspection and make sure we completely and totally addressed all your issues. Our confidence in this process stems from our inspectors’ expertise. They validate that the remediation was entirely successful and that the mold has not moved to a new location.
Stopping Growth in Washington Park 98112
Our mold solutions will do more than simply get rid of existing mold. It isn’t sufficient to just kill and clean up mold where we find it. Prevention is a crucial concern if you want to protect a structure long-term. Some of our mold solution services focus specifically on prevention. We know Washington Park and the greater Pacific Northwest area has its share of mold, so many seek out prevention options to protect them in the future. Any home, office or other structure built here has to be aware of the effects of the damp climate we live in. Don’t overlook this crucial piece of the puzzle.
People often desire mold prevention services while a new building is under construction. Wet weather has ample opportunity to compromise a home while it is exposed in the normal course of the building process. The constant moisture in the air and ground around the Pacific Northwest can promote mold growth. Therefore, during the early stages of construction, it’s important to already be thinking about mold prevention and coming up with options for keeping spores from taking hold. Mold that finds a foothold during construction can hide in a home for years to come before finally being noticed. In that time, it has a chance to cause damage and illness. Mold can make not only you and your family sick, but also your pets. And it causes damage to the integrity of a structure, eating away at walls, floors and even the foundations of the building.
There’s are just more reasons why prevention is so important. It doesn’t matter if the building is a home, officer or hospital, either; they can all benefit. Any new structure can get infested with mold before it’s even complete.
At Mold Solutions NW, we conduct mold prevention using Microbe Guard. This permanent treatment works by creating a new surface over a product such as wood or other surfaces. The added layer will also fight off microbes. After using Microbe Guard, that surface will become inhospitable to mold particles seeking a new place to grow.
We are proud of our approach to preventing future mold growth in Washington Park. Mold prevention can happen after mold remediation, but is also work before or during the process. The specific details of the mold problem in any given building determines the best time for prevention measures.
Even a building that already has a mold problem will benefit from prevention. While it is common to focus on mold prevention during the construction of a building, it’s never too late to think about prevention. A well-loved and lived in house that has never had a problem may still need mold prevention. While it may be more urgent to eliminate the mold that already exists, after that is taken care of, focusing on future prevention will offer peace of mind that mold won’t take hold again. Our remediation process includes prevention of future growth for these reasons. We want to make sure no home, office or other building has a mold problem even if it has already required a remediation to root out an existing issue.
We pride ourselves on offering full service mold inspection, remediation, removal and prevention as part of a comprehensive plan to eliminate mold. We won’t let mold destroy your home, office, school or other building, with our attention to safety, details and your particular circumstances.
Discovering the Mold Problem in Washington Park
Mold can hide for years. We therefore conduct in-depth inspections during any remediation of a building with issues.
Mold can’t escape the careful eyes of our inspectors, who know how to search any home, office or other building for telltale signs. The goal is to get rid of the mold before it can cause damage or get anyone sick. Therefore, our mold inspection process is extremely thorough. As fellow residents of the Pacific Northwest, we understand the challenges that are particular to this area.
One of the biggest causes for concern with mold is health issues. But health issues are just the tip of the iceberg when it comes to motivations for eliminating mold. It can not only be damaging to humans, but also beloved pets and the structures where it is growing. Without even realizing they have a mold problem, home owners might be living in increasing dangerous circumstances. Mold can eat away at many surfaces, including walls, ceilings, floors or the very foundations of the structure.
Obviously, this is a dangerous situation that calls for swift remediation. The climate in Washington Park and the surrounding region can promote mold growth that is harmful to building integrity. Our experienced inspectors understand these complications, though, and how to find any trace of mold you may have. This is why we see inspection as so important to the work of eliminating mold before it can make for a dangerous situation.
Mold Solution Services for Washington Park Residents
Mold problems demand solutions. A successful strategy for dealing with mold should do more than get rid of growth – it should prevent it. Mold Solutions NW understands the particular mold issues facing Washington Park and how to address them. We have therefore made inspection, prevention and remediation the foundations of our strategy.
We believe these core principles of mold solutions provide a comprehensive service appropriate for any mold issues in Washington Park. Our environmentally friendly products are affordable for anyone trying to protect themselves from mold damage and related problems. Our stellar safety record and long experience speak for themselves.